| JOB DESCRIPTION | TYPE OF INSTALLATION | |||
|---|---|---|---|---|
| SURFACE TYPE | FLUSH TYPE/ CONDUIT | |||
| NEW | REPAIR | NEW | REPAIR | |
| SERVICE DROP WIRE # 6/7 DUPLEX 1 – 50 MTS. | 100.00 | |||
| EXCESS OF 50 MTS. | 4.00 / M | |||
| SERVICE DROP WIRE # 4/7 DUPLEX 1 – 50 MTS. | 200.00 | |||
| EXCESS OF 50 MTS. | 5.00 / M | |||
| SERVICE DROP WIRE # 2/7 DUPLEX 1 – 50 MTS. | 500.00 | |||
| EXCESS OF 50 MTS. | 7.00 / M | |||
| SERVICE ENTRANCE W/ METER BOX AT STEEL POLE | 500.00 | |||
| METER POLE W/ ENTRANCE & CIRCUIT BREAKER | 600.00 | |||
| MOUNTING OF METER POLE ASSEMBLY | 150.00 | |||
| SERVICE ENTRANCE AT LOAD SIDE | 100.00 | 75.00 | 200.00 | 100.00 |
| SAFETY SWITCH DPST 30 AMP. | 150.00 | 100.00 | 250.00 | 150.00 |
| SAFETY SWITCH DPST 60 AMP. | 200.00 | 100.00 | 250.00 | 150.00 |
| SAFETY SWITCH DPDT 30 AMP. | 250.00 | 150.00 | 350.00 | 200.00 |
| SAFETY SWITCH DPDT 60 AMP. | 350.00 | 150.00 | 500.00 | 250.00 |
| LIGHTING OUTLET, CEILING FAN. | 75.00 (NM) | 50.00 | 200.00 | 100.00 |
| CONVENIENCE OUTLET | 75.00 (NM) | 50.00 | 200.00 | 100.00 |
| THUMBLER SWITCH SINGLE POLE | 75.00 (NM) | 50.00 | 200.00 | 100.00 |
| 3 WAY SWITCH | 100.00 (NM) | 75.00 | 250.00 | 100.00 |
| PANELBOARD 4 TO 10 HOLES PLUG IN TYPE | 300.00 | 500.00 | ||
| PANELBOARD 10 TO 12 HOLES PLUG IN TYPE | 400.00 | 800.00 | ||
| PANELBOARD WITH CENTER MAIN 10 – 14 BRANCHES | 800.00 MIN | 1500.00 MIN | ||
| MAIN CIRCUIT BREAKER 100 – 200 AMP. | 10.00 PER AMP. | 10.00 PER AMP. | ||
| BRANCH CIRCUIT BREAKER | 8.00 PER AMP. | 8.00 PER AMP. | ||
| TELEPHONE OUTLET | 150.00 | 75.00 | 200.00 | 100.00 |
| CABLE TV OUTLET | 150.00 | 75.00 | 200.00 | 100.00 |
| ACU OUTLET | 250.00 | 100.00 | 350.00 | 150.00 |
| ELECTRIC MOTOR OUTLET | 250.00 | 100.00 | 350.00 | 150.00 |
| WASHING MACHINE OUTLET | 250.00 | 100.00 | 300.00 | 150.00 |
| LAN OUTLET ( COMPUTER NETWORK ) | 200.00 | 100.00 | 250.00 | 100.00 |
| PLASTIC MOULDING OR MOULDINGS | 50.00/LENGTH | |||
| UNDERGROUND SERVICE ENTRANCE FOR #8 mm | 750.00 MINIMUM 1 – 10 MTS | |||
| STEEL POLE FABRICATION ( WELDING WORKS ) | 250.00 PER POLE | |||
| PERCENTAGE BASIS ( DIRECT LABOR COST ) | 35% OF THE TOTAL MATERIAL COST | |||